Pictograms

Recalculate Thresholds on multiple nodes
WARNING: This procedure could have undesirable effects and change your policy on monitoring if not used carefully; please use the help button to read the co...
Thu, 28 Apr, 2016 at 3:06 PM
How to Add Users
You must be logged in as a "Superuser" to access the Admin menu, you must have at least 1 enabled superuser.
Thu, 31 Jul, 2014 at 2:31 PM
Where is the Mutiny About screen?
Fri, 1 Aug, 2014 at 8:59 AM
How do I add a custom background image
Firstly you need to upload your image Next locate the view where the background will be displayed. Remember to untick {T...
Thu, 7 Aug, 2014 at 11:51 AM
How do I add the Trap Agent?
The SNMP Trap agent can be selected from the Add new Agent pull down 
Tue, 12 Aug, 2014 at 6:11 PM
Monitor a webpage
You can use the IP Services test to look for (or not find) text on a website. If you are aiming for a default home page, remember to add a tra...
Thu, 9 Oct, 2014 at 10:32 AM
How do I disable alerts for the whole system
This can be done temporarily by following this pictogram. The Mutiny system will go into a warning state until this is turned off.
Fri, 17 Oct, 2014 at 11:05 AM
How do I add the No Bulk Requests local agent
Fri, 13 Mar, 2015 at 2:48 PM
Testing a route with the Traceroute-via IP Service test
You can check a route exists or has not changed using the Traceroute-via IP service agent. You can also test the route is NOT going via a particular IP with...
Mon, 13 Jul, 2015 at 3:06 PM
How do I set an NTP time source?
Admin>Systems Operations>Time and Date
Wed, 26 Aug, 2015 at 8:31 AM